Powerful fog generator that produces any desired effect from a tiny fog-cloud to the thickest fog. This enables the unit to be used in both small and large locations.

Download Manual

Quality fog machine and a water-based hazer at the touch of a button.

Download Manual

Produces a huge continuous output of low-lying fog. Many impressive effects like fog curtains and waterfalls.

Download Manual

Produces a medium amount of low-lying fog. To be used with stage fogger and CO2 for low-lying fog.

Download Manual

Just add Bee/Olibanum gum to the smoker to produce a unique, small amount of smoke. *no manual available for download

Download Manual

Compact and portable, with a wide assortment of heads.

Download Manual

A gas powered high output fog machine. Perfect for remote locations.
Note: Only available for experienced SPFX technicians.

Download Manual

The Ultimate 200 is a high performance atmosphere haze generator. The machine can operate as a continuous duty haze machine, or it can operate intermittently for periods of time controlled by the user. The machine is instant on and does not need warm-up time. Operates continuously as long as there is fluid and power supplied, and for approximately 40 hours on a full tank.

Download Manual

The Martin-manufactured Roadie X-Stream blends fog and air to produce a variety of effects; from an optically translucent haze to an immensely dense "white-out" of fog over a large area indoors or outside. Large output and length of projection makes it ideal for large stadium concerts or fire and military training simulations. Contact info@bleedingartindustries.com for specs and manual. Check it out here!

Download Manual

The Power Fog Industrial has been designed to meet the demands for extensive continuous usage with large volumes of fog that are required by theme parks, haunted houses and other similar types of installations. The machine is built out of stainless steel which encloses a 1400 Watt Heat Exchanger that incorporates Ultratec´s Award-Winning Rapid Change Technology (RCT). The Power Fog Industrial also has a standard 2-Channel DMX control Interface.

Download Manual

Custom mini cannon takes 2 teaspoons of clay dust and uses an 8 gram CO2 cartridge. Ideal for easy and quick blasts of dust into the atmosphere for theatrical or film special effects. Dust and cartridges can be purchased from our online store by clicking on the links above.

Download Manual

The hand held propane operated Hessey Fogger is perfect for those out of the way places and when you need a fogger that doesn't require electricity. Price includes 1.75L of fluid in unit. Bottle of propane, wafter, and click torch are an additional 12.50. If you're used to an Artem fogger, this is the ideal replacement for it, although the Hessey is water-based and the Artem is oil-based. For trained special effects professionals only.

Download Manual

The Orka is a 9000 watt fog machine and is the most powerful fog machine available on the market. The Orka’s high power and double nozzle output create a massive effect that can fill large arenas and even stadium sized venues. The Orka comes equipped with DMX control, a built in timer and a stand-alone control panel. It is only available as a 230V version.

Download Manual

The Le Torcia is a great breakthrough for on stage torch needs in the entertainment industry. Designed by acclaimed Broadway special effects designer; Greg Meeh. Years of refinement and on stage use has made this the most professional and reliable torch to use. Le Torcia is available in electric start with adjustable flame height, gas safety release and light weight design. 22" in length and 2" wide, it is butane powered and the refill canisters are available in 2 oz canisters. We've added a custom covering to give it a more antique-y, old style look.

Download Manual

Download Manual

Wireless 12 shot firing controller with a range of half a mile.

Download Manual

Download Manual

Holds 3 gerbs per plate. We have 1” and 1 ½” gerb tubes that can be attached to the stage holder.

Download Manual

8 channel radio frequency pyro controller.

Download Manual

Milk crate of ceramic logs of varying sizes, ideal for middle of the woods campfire scenes.

Download Manual

Propane flame kit with accumulator provides great fuel efficiency for a controlled flame up to 3 feet tall, suitable for controlled camp or other fire effects. Attachments for the flame kit include straight bar and firepit cross. Typically includes 1x short (roughly 12") and 1x long (roughly 18") bar as well as the hose, regulator, cart, 1x whip. Custom attachments are available depending on desired effect. Propane and crate of ceramic and/or steel fire logs not included. FOR TRAINED SPFX TECHNICIANS ONLY.

Download Manual

Download Manual

Download Manual

Download Manual

An affordable solution. 110volt, 2 amp rating. Variable speed. Only 17 lbs. *no manual available for download

Download Manual

Good for when you want strong and focused air directed at something.

Download Manual

The Zephyr fan was designed to integrate with most fog and haze machines for assisting in the disbursement of the effect into the atmosphere. This unique design allows most machines to be placed directly on top of the Zephyr fan, for a simple and convenient method of operation.

Download Manual

This 5 HP fan is 3 phase 240 vac. Two hots, a neutral, and a ground; all on camloc plugs. The base is 30" x 40", blade cage is 31.5" across, height of unit is approximately 67" and front to back the unit is 52". The unit is aluminum frame so three or four people can easily load it into the back of a half ton truck. It is sized so that it should fit through most doorways. The unit can reach wind speeds of up to 70km per hour measured at 1m from the cowel. Locking mechanisms can either lock or allow for free movement of pan and tilt. The rear tray can accept weight so that the user can balance to their liking.

Download Manual

The SP model is three times quieter than the regular Little Blizzard. It has built-in DMX and reduced fluid consumption.

Download Manual

Launch confetti and streamers up to 30-feet using a Pro Launcher and a threaded 16-gram CO2 cartridge. Keep extra barrels on hand so you can pre-load and have them ready to go!

Download Manual

The hand-held confetti cannon requires 2x 16g CO2 cartridges to operate. It is approximately 25.5" in length and 2.25" wide and takes about 2.5 lbs of confetti.

Download Manual

This fake black bear has fully articulated limbs. It was fabricated to represent a dead bear for a TV series and is made with a foam sub-structure with high quality fur, eyeballs, tongue, and paws/claws. Weighs approx. 50 lbs and is about 5' in length. Click here for a BTS making-of video. For more images, visit the Gallery section.

Download Manual

0-3 month old super realistic looking female babies that are also of the right weight; one crying, the other sleeping. Rental price is per baby. Discount will be applied if both are rented. Enquire directly. Like real life parenting, there is no manual available.

Download Manual

Young half horse stuffy, fully jointed to be actor manipulated for maximum life-like appearance. For shoot, was covered in an amniotic sack and slimes, being pushed between the legs of a mare. Intercut between this and actual foal creates a very realistic look when properly matched.

Download Manual

One year old grizzly cub. Jointed stuffy created to match real existing cubs for TV shoot. Extended range of motion and equipped with access hole with ribs hinged for an air bladder to simulate breathing. Detachable incision sections also available for operating scene.

Download Manual

This prosthetic grade silicone adult Rainbow Trout is approximately 14" long (35.56 cm) and was created for a fishing scene. using this beast gave ultimate control of the shot and ensured no biological issues would arise in the waterway. Has reinforced jaws to support the weight of a fish hook and is weighted for neutral buoyancy in the water.

Download Manual

Flesh coloured silicone intestine with simulated veining throughout. Approx 4.5' in length and 4.3 pounds.

Download Manual

Pink coloured silicone intestine with simulated veining throughout. Approx 7.5' in length, 4.5 pounds.

Download Manual

Pinkish-grey coloured silicone intestine with simulated veining throughout. Approx 7' in length, 5 pounds.

Download Manual

Pinkish-grey coloured silicone intestine with simulated veining throughout. Approx 3' in length, 2.3 pounds.

Download Manual

Our two rats are made of prosthetic grade silicone and rabbit fur. They are both 14” from the tip of the tail to the nose. Pricing is per rat.

Download Manual

Pricing is per heart.

Download Manual

Male arm and hand with bone protrusion made of silicone, foam, plastic, 28” x 5” and weighs 2 pounds.

Download Manual

Male leg and foot made of foam, silicone, and synthetic hair. Foot alone is 10” x 4” and .55 pounds. Leg portion is 25” x 5” and 2.1 pounds.

Download Manual

Silicone hands weighing 2 pounds and are each 10” x 2”.

Download Manual

Four silicone pinky fingers, approximately 3” in length. Pricing is per pinky finger.

Download Manual

Severed tongue made of foam and silicone. Weighs 10 grams and is 2” x 1.5” in size.

Download Manual

Severed ear made of foam and silicone, weighs 25 grams and is 2.5” x 1.5” in size.

Download Manual

Scalp and hair weighing approximately 1 pound. Made of silicone and synthetic hair.

Download Manual

Two thumbs made of silicone, each weighing 34 grams and are 3.25” in length. Price is per thumb.

Download Manual

Silicone pair of male feet

Download Manual

Foam and silicone hands, each weighs about 2 pounds on its own and is 8” x 2.5”.

Download Manual

Foam and silicone hands, each weighs about 2 pounds on its own and is 8” x 2.5”. Hair-punched.

Download Manual

Two knives available; each are approximately 11” x 1” and are made from a semi rigid urethane resin. Price is per knife.

Download Manual

32″ high director/make-up chair constructed of laminated bamboo and high density foam, padded seat and padded rectangular back rest. *no manual available for download

Download Manual

Easy to carry and set up, this table-top mirror has two swing-in front doors and three natural fluorescent lights bordering the mirror. Available in black or natural tan. Plugs into any 110v AC outlet. *no manual available for download

Download Manual

The turntable itself is 23.25” across. It is welded onto a platform that is 35” x 34”. Variable speed.

Download Manual

Four 4x8 flats available with 47 rows of fake grass punched into each. Great for any kind of model shot where you need to show realistic looking grass or crops. Sand can be dusted on to cover spots where glue is visible. Click here to purchase a BAI duster that is perfect for spreading dirt, dust or sand. EACH flat is $50 per day or $150 per week.

Download Manual

This crowbar is made of rubber with a metal core for stability. It is 21 3/8".

Download Manual

This prop extinguisher is made of plastic and metal and is 16” x 4” in size and weighs approximately 2 pounds.

Download Manual

Very light weight. Dimensions: 6 3/4” x 3 1/4"

Download Manual

This prop hammer has a wooden handle with a foam head. It is 14” in length.

Download Manual

This prop hatchet is 15” in length with the head being 5 5/8” in length. It is entirely made of rubber.

Download Manual

Our fake prop sword is made out of aluminum with a plastic handle. It is 29.5" inches in length.

Download Manual

Download Manual